- Additional information
- Reviews (0)
Arduino Prototype DIY KIT
- 1 x ATmega328P-PU without Bootloader .
- 1 x DIP Socket .
- 5x Jumper wire
- 1x 7805 Voltage regulator
- 2x LEDs
- 2x 220 Ohm resistors
- 1x 10k Ohm resistor
- 1x 10 uF electrolytic capacitors
- 1x 470 uF electrolytic capacitors
- 1×16 MHz clock crystal
- 1×22 pF capacitors
- 1×18 pF capacitors
- 1x FR1 DIY Prototype Printed PCB
Note : content of kit updated on 1 Oct,2020
Only logged in customers who have purchased this product may leave a review.